Programming the Mecanum Robot with Block Coding in PictoBlox

The Quarky Mecanum Wheel Robot is a type of robot that uses a special type of wheel to move. The wheel is made of four rollers mounted at 45-degree angles to the wheel‘s hub. Each roller has its own motor and can spin in either direction. This allows the wheel to move in any direction, making it an ideal choice for navigating around obstacles and tight spaces. The mecanum wheel robot can also turn on the spot, allowing it to make sharp turns without having to reverse direction.

The robot is programmable with PictoBlox. PictoBlox is coding education software that uses both graphical block-based coding and Python programming.

With PictoBlox, you can program the Mecanum Robot to move, grip, and perform pick & place actions!

If you haven’t installed PictoBlox, please follow the instructions:

Windows Installer (.exe)

STEP 1: Download the Pictoblox Installer (.exe) for Windows 7 and above (Release Notes).

Windows Installer 64-bit

Windows Installer 32-bit

STEP 2: Run the .exe file.

Some of the device gives the warning popup. You don’t have to worry, this software is harmless. Click on More info and then click on Run anyway.

STEP 3: Rest of the installation is straight forward, you can follow the popup and check on the option appropriate for your need.

 

Your software is now installed!

macOS Installer

STEP 1: Download the Pictoblox Installer (.dmg).

macOS Installer

STEP 2: Run the .dmg file.

Mobile App Installer

STEP 1: Open Google Play Store on your Smartphone and and search for PictoBlox or visit the link here to head over to the Google Play Store. You can even scan the QR Code below from your Smartphone to head to the PictoBlox App.

Mobile App Installer

STEP 2: Install the PictoBlox App.

Connecting Quarky with PictoBlox

Let’s begin by first connecting Quarky to PictoBlox. Select your preferred type of device i.e. either the desktop/laptop or your smartphone and follow the instructions.

Desktop

Follow the steps below for connecting Quarky to PictoBlox:

1. First, connect Quarky to your laptop using a USB cable.
2. Next, open PictoBlox on your desktop.
3. After that, select Block as your coding environment.
4. Then, click the Board button in the toolbar and select board as Quarky.
   
5. Next, select the appropriate Serial port if the Quarky is connected via USB or the Bluetooth Port if you want to connect Quarky via Bluetooth and press Connect.
   
6. Click on the Upload Firmware button. This will upload the latest firmware in Quarky.
   
   Note: If your device already has the latest firmware, then PictoBlox will show the message – Firmware is already updated. For learning more you can refer to this tutorial: https://ai.thestempedia.com/docs/quarky/quarky-toubleshooting/updating-quarky-firmaware-with-pictoblox/
7. Once the firmware is uploaded, Quarky starts the Getting Started program. This runs only for the first time. Run through it.

And voila! Quarky is now connected to PictoBlox.

Mobile

Follow the steps below for connecting Quarky to PictoBlox:

1. First, power ON Quarky.
2. Open PictoBlox on your smartphone. Go to My Space and make a new project by clicking the ‘+(plus)’ button in the bottom-right corner.
   
3. Then, tap the Board button in the top-right corner of the toolbar.
   Select board as Quarky.
   
4. Next, tap the Connect button:
   Select your device from the list.
   

And voila! Quarky is now connected to PictoBlox.

Quarky Mecanum Extension

The Quarky Mecanum extension in PictoBlox allows you to control the robot. It has blocks for specific applications. To add the Quarky Mecanum extension follow the instructions:

1. Click on the Add Extension button and add the Quarky Mecanum extension.
2. You can find the Quarky Mecanum blocks available in the project.

PictoBlox Blocks for Quarky Mecanum

The following blocks are available for the Quarky Mecanum:

The block initializes the Quarky Mecanum Robot Drive Motors. This allows the code to have information on which port is connected to the Front Left, Front Right, Back Left, and Back Right Servo Motors.

The block makes the robot move in the specified direction at the specified speed.

The block makes the robot move in the specified direction with the specified speed for the specified time and then stop automatically.

The block stops all the motors of the robot.

The block sets the individual motors at the specified speed. Here -100 is the motor running in the reverse direction at full speed and 100 is the motor running in the forward direction at full speed. 0 means the wheel will be stopped.

The block makes the selected motor to run at the specified speed.

This block sets which ports the left and right servo motors of the pick and place robot are connected to.

The block sets the pick or the place action angles to the specified value.

The block sets the pick and place arm angles to the specified value.

The block moves the servo motors of the pick and place robot at the pick angle specified by the user.

The block moves the servo motors of the pick and place robot to the place angle specified by the user.

The block sets the servo motor port of the gripper robot within the code.

The block sets the Gripper Robot’s gripper servo motor angle for the open or the close position to the specified value.

This block sets the angle of the robot’s gripper servo motor to a value you specify.

This block allows the Gripper Robot to open its gripper.

This block allows the Gripper Robot to close its gripper.

All articles loaded

No more articles to load

Conclusion

In conclusion, the Quarky Mecanum Wheel Robot is a powerful and versatile robot that can be programmed using PictoBlox. With its Mecanum extension, it can be programmed to move in any direction, grip objects, and perform pick & place actions. With the help of PictoBlox, users can easily program the robot to perform their desired tasks.